The very first thing that you are going to want to take into consideration is the pitch of your shed’s roof because this will help to determine if you will be comfortable working on it.

While there would be nothing wrong with hiring someone to shingle your roof for you, if you are well read on how to do the work yourself it is something that you can easily accomplish. If you are going to put shingles on your storage shed roof yourself you are going to need to be sure that you are keeping your personal safety in mind. Making sure that the work is done correctly is very important however you do not want to risk your health to do the job. So if you have the proper tools to accomplish the job and have planned ahead with a safety plan you can do a great job shingling your roof.

You will need the following materials in order to properly put shingles on your shed; a hammer, staples, roofing felt, barbed roofing nails, staple gun hammer, utility or trimming knife, straightedge ruler, ridge cap shingles, and asphalt shingles.

Because you do not want to go over your budget and waste your time and purchase more materials then you are going to need. You are going to want to figure out just exactly the total area of your roof. You will then have an excellent idea as to just about the exact number of shingles that you are going to need to complete your job. After that has been figured out you can figure out what type, style, color and texture of shingle that you want to get.

The first thing to do would be to unroll the roofing felt over the plywood top of your roof. The felt should then be stapled down securely over the surface and around the edges to cover the entire roof.

You are going to want to get starting by unrolling the roofing felt all across the plywood top of your storage shed. You want to staple the roofing felt securely to the roof. You also want to be sure that the felt will go around the corners of the roof so that the entire surface is covered.

Make sure that the very first row for shingles that you are putting on your roof is being placed on upside down. Be sure that the tabs are sticking face up. You are going to want to cut the first shingle about six inches and make sure that it overhangs the drip edge of your storage shed. You will be using full sized shingles for the rest of your project.

While you continue to place your shingles on the roof of your storage shed set them so that the row above the row you are working on is slightly offset. You can create the illusion of overhang by continuing to use this pattern. Once you are done putting all of the shingles on each side of the shed you then attached the roof top shingles from side to side.

When you start with the next row of shingles going up, make sure that each shingle tab on the row above would be nailed down such that it is offset halfway with the seam of the shingle below it. Repeating this pattern gives the effect of an overhang.

Trim off any excess part of the shingles from the sides of the roof. You may also use constructive adhesive to reinforce shingles along the edges and prevent them from popping out. Upon reaching your roof’s peak, attach the ridge cap shingles down the middle from side to side of the roof. Trim off any excess parts, and then clean up.

Having a storage shed can be a great addition to anyone’s property no matter what you plan to store inside it. Of course whatever you do plan to store in your shed you are going to want to make sure that it is kept safe and secure. This is where putting up shingles or replacing old and damaged shingles comes in.